联系我们

公司名称:XXX

电话:XXX

手机:XXX

联系人:XXX

地址:XXX

新闻动态
高压胶管接头安装事项
高压胶管接头安装事项:
Installation of high pressure rubber hose joint:
(1)胶管在移动或静止中,均不能过度弯曲,也不能在根部弯曲,至少要在其直径的1.5倍处开始弯曲;
(1) the rubber tube shall not be over bent or bent at the root when it is moving or still, at least at 1.5 times of its diameter;
(2)胶管移动到极端位置时不得拉得太紧,应比较松弛;
(2) when the rubber hose moves to the extreme position, it shall not be pulled too tightly, and it shall be relatively loose;
(3)尽量避免胶管的扭转变形;
(3) try to avoid the torsional deformation of the hose;
(4)胶管尽可能远离热辐射构件,必要时装隔热板;
(4) the rubber tube shall be as far away from the thermal radiation components as possible, and the heat insulation board shall be installed when necessary;
(5)应避免胶管外部损伤,如使用中同构件表面的长期摩擦等;
(5) the external damage of the rubber tube shall be avoided, such as long-term friction on the surface of the same component in use, etc;
(6)若胶管自重引起过分变形时,应有支托件。
(6) if the self weight of the hose causes excessive deformation, there should be supporting parts.

联系方式

  1. 公司名称:XXX
  2. 电话:XXX
  3. 手机:XXX
  4. 联系人:XXX
  5. 地址:XXX

版权 © 河北液压接头厂 网址:jietou.89ix.com  推荐:

网站建设及优化保定遨游网络公司