泉州通风管道诚信加工厂

（1）胶管在移动或静止中，均不能过度弯曲，也不能在根部弯曲，至少要在其直径的1.5倍处开始弯曲；

(1) the hose is neither bent nor bent at the root of the moving or stationary, or bent at least 1.5 times its diameter;

（2）胶管移动到极端位置时不得拉得太紧，应比较松弛；

(2) when the hose moves to the extreme position, it should not be pulled too tight and should be more relaxed;

（3）尽量避免胶管的扭转变形；

(3) avoid twisting deformation of hose;

（4）胶管尽可能远离热辐射构件，必要时装隔热板；

(4) hose as far as possible from thermal radiation components, necessary fashion insulation board;

（5）应避免胶管外部损伤，如使用中同构件表面的长期摩擦等；

(5) the external damage of the hose should be avoided, such as the long-term friction on the surface of the workpiece in use;

（6）若胶管自重引起过分变形时，应有支托件。

(6) if there is excessive deformation caused by the dead weight of the hose, it should be supported.