| 液压管接头管路布置要求 |
| 添加时间：2019/11/19 14:36:21 浏览次数： |
| （1）管路要尽量避开高温辐射及冷却水喷淋等温度太高或太低之处，特别是胶管接头； (1) try to avoid high or low temperature places such as high temperature radiation and cooling water spray, especially rubber pipe joints; （2）布管应不影响主机等设备运转，要安全可靠，方便工作、观察、维修； (2) the pipe laying shall not affect the operation of the main machine and other equipment, and shall be safe and reliable, convenient for work, observation and maintenance; （3）布管要横平竖直、整齐美观。尽量少拐弯或小角度弯管，采用大圆弧，从而减少油流阻力； (3) the pipe layout shall be horizontal, vertical, neat and beautiful. Reduce bends or small angle bends as much as possible, and adopt large arc to reduce oil flow resistance; (4）安装发生抵触时，应小管让大管、低压管让高压管； (4) in case of conflict in installation, small pipes shall be used to let large pipes and low-pressure pipes to let high-pressure pipes; （5） 管道在相互交叉时不能接触，应隔开一定距离； (5) the pipelines shall not contact each other when crossing, and shall be separated by a certain distance; （6） 平行管道的接头要错开安装，以免影响安装和拆卸； (6) the joints of parallel pipes shall be installed staggered to avoid affecting the installation and disassembly; （7）管道为便于拆卸清洗，应适当安装活接头，但要少用，减少泄漏的可能性。 (7) in order to facilitate disassembly and cleaning of pipes, flexible joints shall be properly installed, but less shall be used to reduce the possibility of leakage. |
| 上一页 液压接头的液压系统辅助元件有哪些 |
| 下一页 液压管失效的五大方面 |
Copyright © 技术支持：遨游网络